Best 3D Printer Extruder – Expert Rating

In this article, we’ve compiled a list of the best 3d printer extruder available to buy online. To help you make your decision, we’ve included the key features of each 3d printer extruder so that you can compare them and choose the one that best meets your needs.

Editor’s Top Choice

In order to help you take an informed decision, we’ve listed the best-selling 3d printer extruder below. We also included the features of each of these 3d printer extruder to help you find the right one for your needs.

11 Best 3D Printer Extruder to Buy This Year

SaleRANK 1
Official 3D Printer Extruder, Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer...
  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use!
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture between pneumatic joint and Teflon tube. What's more,...
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly making the red extruder retain powerful in filament...
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are included in the package.
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini, CR-10 S5, CR-10 S4.
SaleRANK 2
Creality Official Ender 3 Aluminum Extruder, 3D Printer Ender 3 Extruder, CR-10 Extruder Upgrade MK8...
  • UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer...
  • STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old...
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden...
  • ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits...
  • Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.
BIGTREETECH MK8 Dual Gear Extruder 3D Printer Extruders Compatible with Creality Ender 3/5 CR10S...
  • ⭐Not Easy to Lose Step: The extruder adopts a double-gear double pneumatic joint extrusion structure, which makes the extrusion pressure greater, ensuring smooth feeding and not easy to lose step.
  • ⭐High-quality Material: The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan.
  • ⭐Widly Application: Not only suitable for CR10S PRO original machine, CR-10S PRO's original aluminum alloy driver, but also can be installed in Ender-3, Ender 3pro, Ender 5 and so on.
  • ⭐Need DIY by Yourself: For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY.
  • ⭐After-sales Service: If you have any questions about the product, you can contact us at any time through Amazon, and we will give you a satisfactory answer.
Micro Swiss Bowden Dual Gear Extruder Compatible with Creality Ender, CR10, CR-10 Pro, CR-10S,...
  • Fits: Bowden extruder machines, Fits NEMA 17 size stepper motors
  • Fits: Ender 3, 5, 6, CR10, CR-10s Pro, CR-10S, CR6-SE, Tornado
  • Made in USA by Micro Swiss
3D Printer Extruder, Dual Gear for Extruder Dual Drive Extruder All Metal High Performance Upgrading...
  • 【Function】The extruder is designed for 1.75 mm wearing parts, and the fastening spring device allows the user to fine-tune the pressure exerted by the dual-drive gear on the wearing parts
  • 【Feed power】The 3D printer extruder adopts a unique double-page paper feed mode, the gear can be minimized, slippage and increase paper feed power
  • 【Good performance】The reduction gear device can also provide greater torque for extrusion, while reducing the burden on the motor and extending the life of the motor. 1.75 mm wearing parts The...
  • 【Application】For all metal extruder is suitable for various nylon and TPU/TPE soft materials, which has compact design for easy portability and storage
  • 【Adjustability】Users can freely adjust the tightness according to the characteristics of consumables
SaleRANK 6
Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth...
  • The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder.
  • Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
  • Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install.
  • 100% brand new and original Creality exturder. If you have any question, please feel free to contact us.
WINSINN Dual Gear Extruder, Ender 3 v2 Upgrade Motor Shaft>20mm, Compatible with Ender 3 Pro CR10...
  • ✔️【Purchase Note】ONLY for 3D Printers with motor shaft over 20mm, please measure the shaft length before placing order. Due to Creality batches, the original motor shaft of the Ender 3 series...
  • ✔️【Replacement Kit】Perfect extruder replacement kit for Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 Pro, CR10 S series, Tornado, etc.
  • ✔️【Stable And Durable】Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working. Double gear extrusion mechanism, high extrusion...
  • ✔️【Kindly Reminder】Please calibrate the E-steps from 100 to 139.
  • ✔️【Packing List & Warranty】1 x Dual Gear Extruder (This Kit NOT include the stepper motor, motor bracket and instruction manual). 1 Year Warranty. Each product of WINSINN had passed strict QC,...
Creality 3D Printer Kit with Aluminum Ender 3 Extruder Upgraded, Compression Die Springs for Bed...
  • 【Great Replacement】Our Tresbro perfect aluminum adjuster wheels, bed leveling springs combined with the all metal extruded made a big difference in the print quality for your Creality 3D printer....
  • 【1*Silver Metal Bowden Extruder】The all metal Mk-8 extruder feeder drive 1.75mm filament is very well built and seems to grip the filament alot better than the plastic stock one, that can prevents...
  • 【4*Hand Twist Level Nuts】Metal nuts was more powerful and will twist more tightly than the original plastic nuts. The torque of these nuts is large, making it easier to fine tune the hot bed,...
  • 【 4*Small Yellow Compression Springs】The die springs are a worthwhile upgrade, making bed levelling easier and stronger than the stock ones, so you don't have to worry about leveling the bed over...
  • 【 Easy To Install 】 They were super easy to install and works like a charm. Your 3d printer was in major need of these small upgrades and helped improve your print quality alot. If you have any...
SaleRANK 9
Official Upgrade Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3...
  • 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work for the same functions as the golden ones.
  • Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
  • With more terminal housing and pins as spare parts, in case fail installation and waste .
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
SaleRANK 10
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade...
  • It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
  • Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear,...
  • Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder...
SaleRANK 11
BZ 3D 2 in 2 Out Extruder 12V 40W Dual Color All Metal for 3D Chimera Hotend Kit Multi-Extrusion V6...
  • Chimera is a 2 In 2 Out - Dual Extrusion System. Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package.
  • Nozzles can be individually adjusted in height for an easy setup experience.
  • Each nozzle is individually temperature controllable for ultimate material versatility.
  • Chimera inherits the best from it’s cousins, V6 and Kraken, combining them into a single, reliable, yet highly capable hotend .
  • If you have any questions, please feel free to contact us via email. We will reply you within 24 hours and help you solve the problem.

So, these are the top 3d printer extruder trending on the market today. To make your choice easier we’ve prepared a comprehensive buying guide below:

Guide to Choose the Best 3D Printer Extruder

With so many 3d printer extruder available on the market, it can be hard to decide which one to buy. To assist you in your decision-making process, here are some important factors that you should to consider in order to buy the best 3d printer extruder for your needs.

Consider the Quality

It is important to consider the quality when buying 3d printer extruder because a higher quality product typically has better durability, performance, and overall satisfaction. Additionally, it can save money in the long run as it may not need to be replaced as frequently as a lower quality 3d printer extruder.

Performance of the 3D Printer Extruder

Performance is important when buying 3d printer extruder because it determines how well the product will function and meet the user’s needs. The 3d printer extruder with good performance will typically be more reliable and efficient, and will be able to perform its intended tasks more effectively than a product with poor performance. Additionally, 3d printer extruder with good performance tend to have a longer lifespan, which can ultimately save your money in the long run.

Consider the Features

It is important to consider the features when buying 3d printer extruder because it allows you to make informed decisions about the capabilities and functionality of the 3d printer extruder. Additionally, features also have an impact on the performance, durability, and overall value of the 3d printer extruder, which can affect the satisfaction of the consumer over time. By carefully evaluating the features of 3d printer extruder, you can make more informed and confident purchasing decisions, which can ultimately lead to a better overall experience with the product.

Price of the 3D Printer Extruder

The price of 3d printer extruder is an important consideration because it is a measure of the cost of obtaining that product. It is important to consider the price in relation to the value that the 3d printer extruder provides. Additionally, budget constraints and financial goals may also play a role in determining whether or not the 3d printer extruder is affordable or worth the cost.

What’s the Warranty of the Product?

A warranty is a guarantee that the 3d printer extruder will perform as advertised or that the manufacturer will repair or replace it if it does not. It gives the consumer protection against defects or issues that may arise with the 3d printer extruder after purchase. Consideration of the warranty can give peace of mind and protection against unexpected costs if a problem does occur with the 3d printer extruder. Additionally, it can also indicate the manufacturer’s confidence in the product and its quality.

You may also like: 16 Best Carbon Fiber 3D Printer: Top Rated and Reviews


Is it worth it to buy 3d printer extruder?

The decision to purchase 3d printer extruder depends on your intended usage. If you will use it regularly, it may be worth the investment. If you will not use it often, buying 3d printer extruder may not be worth the cost.

What Key points to keep in mind when Choosing 3d printer extruder?

When picking 3d printer extruder, make sure to consider things like quality, performance, features, customer ratings, price, and warranty to make the best choice.

How can I get my hands on the best 3d printer extruder without breaking the bank?

When searching for 3d printer extruder, consider both local and online options. Online stores, such as Amazon, can save you time and energy, and often offer discounts when buying 3d printer extruder. On the other hand, in-store purchasing can be more time-consuming.

The Bottom Line

The 3d printer extruder options listed above should assist you in finding the perfect one for you. Take a look at the features of each 3d printer extruder and choose the one that most closely meets your needs. If you have yet to find the right 3d printer extruder, please reach out to us by leaving a comment below.

4 Reviews
Joe Stokes
Joe Stokes


I am an ambitious and dedicated professional, with a recently earned degree in business administration from a renowned university. My studies have equipped me with the knowledge and skills necessary to excel in the corporate world. I have a passion for traveling, exploring different cultures, and learning about new places; this has allowed me to develop an open-minded approach to problem-solving. I use my ability to quickly analyze situations and devise creative solutions that are both effective and efficient. I am also detail-oriented and highly organized which allows me to consistently produce high-quality work in all areas of my professional life. In addition, I love writing authentic reviews on office products such as printers, projectors, etc.

Leave a Comment